Pliops Unleashes the Full Potential of SSDs at Flash Memory Summit

Storage Processor Optimizes Data-Intensive Workloads for Exponentially Faster, More Cost-Effective Flash Storage

SAN JOSE, Calif., Nov. 10, 2020

Solid state drives have become mainstream for high-performance applications – but are data center managers getting the most out of their SSD investments? This week at the Flash Memory Summit (FMS) Virtual Conference & Expo, technology innovator Pliops will highlight its Storage Processor, a hardware-enabled storage engine in a PCIe card form factor that unlocks the full potential of SSD storage.

“The performance potential of most of the flash sitting in data centers is barely being tapped into – 80% of the flash being purchased today is being wasted,” noted Steve Fingerhut, president and chief business officer for Pliops. “We’re here to change that. Instead of resorting to data center sprawl, overprovisioning and increased costs, customers deploying Pliops maximize the available performance and expand the potential of existing architectures. We are looking forward to the opportunities and forums FMS provides to share how we’re giving architects and engineers the power to do more with their SSDs.”

A fundamental building block for the data-centric era, the Pliops Storage Processor addresses the exponential growth of data storage – and the subsequent computational processing requirements this has created. Pliops uses an innovative, patented data structure to eliminate amplification and enable consistently high I/O performance, capacity and endurance.

FMS Virtual Booth Demonstrations

Featured in the Pliops virtual booth, Pliops will be showcasing a number of demos that demonstrate the following values:

  • Application acceleration – Greatly reduced latency and CPU offload enables higher performance and greater application instance scaling.
  • Dynamic capacity expansion – With Pliops’ high space efficiency, store more user data than physical drive capacity via thin provisioning – a first in a building block accelerator.
  • Drive fail protection – Pliops architecture natively simplifies and accelerates drive fail protection (like RAID 5) at twice the performance of RAID 0, even during rebuild from drive failure.
  • Endurance – With Pliops’ high write efficiencies, lower-cost SSDs – including QLC – can be used for an extended life across high-performance workloads, even enabling SSDs to last up to five years instead of three.

 

The Industry Speaks Out on Pliops

Intel

“We are excited to see how innovators like Pliops are using Intel® QLC 3D NAND SSDs to maximize overall solution value and performance,” noted David Dixon, vice president, data center NAND division, Intel. “Pliops has shown that advanced data shaping and acceleration techniques can deliver the full value of QLC savings with no compromises. In fact, using Pliops technology with Intel® QLC 3D NAND SSDs provides significantly better performance than TLC SSDs alone. We look forward to continued collaboration with Pliops.” 

SAKURA internet

Takeshi Hasegawa, engineering manager of SAKURA internet, explained, “As a cloud computing provider, we see first-hand the high cost of using flash. Thanks to Pliops’ technology, we are able to realize higher performance from our investments and support more concurrent users. Many of our customers use dedicated servers with NVMe flash, but they want to increase their database performance. Using Pliops’ Storage Processor provides a superior architecture, with high performance and space savings all with drive failure protection. This is the best product for server-side flash that I have seen in 10 years.”

Percona

“In recent years, there has been an explosion of data,” said Peter Zaitsev, co-founder and CEO, Percona. “Because of this, there have been a lot of concerns about being able to handle this data with performance and efficiency. Pliops’ innovations are absolutely fantastic. Over the last decade, we have seen huge performance gains due to the transition from hard drives to flash and other types of solid state storage. But that has since leveled off, in large part because we’re treating storage as ‘dumb’ devices, which is not helpful for database workloads. Pliops’ technology enables the ability to turn ‘dumb’ flash storage into ‘smart’ flash storage. According to our benchmarks, the Pliops Storage Processor is unique in that it is able to increase performance, improve compression and reduce write amplification.”

Accelerating the State of Storage

To help further industry adoption of innovative new technologies, Pliops is headlining a keynote presentation and participating in several technical sessions at FMS:

  • FMS Keynote Presentation – “Storage Processors to Unleash the Full Potential of Flash Storage” with special presenters Aryeh Mergi, FMS Lifetime Achievement Award winner, Intel, Percona and SAKURA internet who discuss their experiences with Pliops Storage Processor
  • FMS Session – “Storage Processors Accelerate Data Workloads”
  • FMS Panel – “Which SSD Is Best for Your Application?”
  • FMS Live Chat with Nvidia – “DPUs and Storage Processors to Accelerate and Secure Modern Data Centers”

Pliops’ mission to deliver the performance needed for today’s most pressing data-intensive challenges – from databases and analytics to software-defined storage and machine learning platforms – has been met with strong industry support. Most recently, the company announced that its Storage Processor has been successfully tested and evaluated by more than 10 tier-one cloud and enterprise companies. The results? Pliops has been proven to boost performance by more than 10x and reduce four 9s latency by up to 1000x, allowing enterprises to up-level existing infrastructures, eliminate bottlenecks and improve resource utilization.

Pliops’ Storage Processors are now sampling to select customers, with general availability on track for early 2021. Please visit www.pliops.com for more information.

About Pliops
Founded in 2017, Pliops is a technology innovator focused on making data centers run faster and more efficiently. Its technology addresses skyrocketing data volumes and solves the slowing compute performance problem. The company’s Storage Processor is built upon a groundbreaking patent-pending approach that accelerates storage functions. Focused on creating the next wave of the accelerated data center, the Pliops Storage Processor enables cloud and enterprise customers to access data up to 100 times faster – using just a fraction of the computational load and power consumption. With Pliops technology, databases, analytics and other data-intensive applications are able to reach their full potential. Investors include Softbank Ventures Asia, Intel Capital, Western Digital, NVIDIA, and Xilinx.

For more information on Pliops technology or career opportunities visit www.pliops.com or connect on Twitter and LinkedIn.

Media Contact:
Stephanie Olsen
Lages & Associates
(949) 453-8080
stephanie@lages.com

Share This Post

Share on facebook
Share on linkedin
Share on twitter
Share on email

Get the latest updates from us!

Pliops is solving a critical problem for database and storage architects – and doing it in a way that is both elegantly simple and amazingly efficient. Keep in touch with us.